Drying oven

Drying oven


Using an imported temperature meter (with PID adjustment function), the furnace temperature can be adjusted arbitrarily from room temperature to 100 ℃, and the accuracy can be controlled within ± 5 ℃ after the furnace temperature is stable. In order to make the temperature closer to the measured value, the thermocouple is installed at the surface closest to the bar.

Details

Technical parameters:

drying furnace dimensions of about:

L×W×H = 3.4×0.6×1.5(m)

Network bandwidth approx:

250mm, furnace height 100mm

The heating element in the furnace is made of stainless steel heating plate.
Three temperature meters are set in the furnace to control three groups of heating bodies respectively.
Using an imported temperature meter (with PID adjustment function), the furnace temperature can be adjusted arbitrarily from room temperature to 100 ℃, and the accuracy can be controlled within ± 5 ℃ after the furnace temperature is stable. In order to make the temperature closer to the measured value, the thermocouple is installed at the surface closest to the bar.
In order to prevent the product from being contaminated, the furnace is made of heat-resistant stainless steel.
The frequency conversion motor is used for arbitrary speed regulation, the belt speed is adjustable in the range of 0-10cm/sec, the belt speed is stable, the mesh belt runs smoothly, and there is no obvious crawling and offset phenomenon.



 

 

Key words:

Drying oven

Message consultation

Note: Please leave your phone number and our professionals will contact you as soon as possible!